Limescale remover for exterior surfaces on the boat, or engine and internally for cooling systems.

Limescale remover, by Kremis Chem, suitable for exterior surfaces on the boat, or for the boat’s engine, either on external components, such as propellers, or internally, in cooling systems.

The Kremis Chem Limescale Remove (Lo) cleans and immediately removes scale from external components of the outboard, such as propellers, trims, flaps, etc. For the rest of the boat, it removes scale from areas such as the bathroom, the external portholes, windows, metallic constructions, etc.

The descaling solution eliminates seawater deposits on the motor, thus restoring the gloss on the outside. It can also be used on and does not affect rubber surfaces.

Kremis Chem Limescale Solution is also used for cleansing the cooling system of both inboard and outboard engines. Thoroughly cleans the system that uses seawater recirculation to cool down the engine, often depositing scale in the circuit. The scale deposits build up over time, interfering with the normal functioning of the system.

Available in 1 Liter bottle with a spray gun and in 4 Liter container.

Instructions of use:

• For external use, spray the surface you want to remove the salt stains and rinse in 1 minute
• For inside the engine, you will need enough quantity of limescale remover
• Place a tank under the engine and connect a pump, removing the impeller and the thermostat
• Circulate for 15 minutes and then rinse with clean water