Victron Energy Smart IP43 Charger 120-240 V (3)

$145.00 ~~$528.00~~

With boat owners in mind this adaptive 5-step Victron Energy Smart IP43 Charger can provide either 30A, or 50A of charge to each of three battery banks.With boat owners in mind this adaptive 5-step Victron Energy Smart IP43 Charger can provide either 30A,

Payment:

Payment Option Image

Description
Reviews (0)

With boat owners in mind this adaptive 5-step Victron Energy Smart IP43 Charger can provide either 30A, or 50A of charge to each of three battery banks.

Alternatively the charger 1+1 model provides 3A to the starter-battery and the rest to the House Bank.

Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. The Victron Energy Smart IP43 Charger is intelligent and offers dynamic charge features.

Bluetooth Smart Built-In: The wireless solution to set-up, monitor, control, update and synchronise Smart IP43 Chargers
Smart IP43 Charger (1+1): Two outputs to charge 2 battery banks. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter
battery.
Smart IP43 Charger (3): Three full current outputs to charge 3 battery banks
Adaptive 6-stage Charge Algorithm that can be preset to suit different types of batteries and automatically optimise the charging process.: Bulk Absorption Recondition Float Storage Refresh
Preventing damage due to excessive gassing
Less maintenance and aging when the battery is not in use
Also charges Li-ion (LiFePO) batteries

Download here the IP43 Charger Datasheet.

Download here the IP43 Charger Manual.

Download here the IP43 Charger Mechanical Drawing

Technical Characteristics

Input Voltage: 85 250 VAC (full power from 100 VAC, startup from 90 VAC)
DC Input Voltage Range: 90 375 VDC
Frequency: 45-65 Hz
Maximum Efficiency: 95% / 94%
Maximum Input Current Setting: 3 – 10A
Number of Battery Connections (1+1) Models: 2 (2nd output via 2 pole terminal & 4 A max)
Number of Battery Connections (3) Models: 3
Charge Current House Battery: 30 A / 50 A
Low Current Mode: 15 A / 25 A
Dimensions: 180 x 249 x 116 mm
Weight: 2.7 kg

Phoenix Smart IP43 Charger	12V, 2 outputs 12/30(1+1) 12/50(1+1)	12V, 3 outputs 12/30(3) 12/50(3)	24V, 2 outputs 24/16(1+1) 24/25(1+1)	24V, 3 outputs 24/16(3) 24/25(3)
Input voltage	230 VAC (range: 210 250 V)
DC input voltage range	290 355 VDC
Frequency	45-65 Hz
Power factor	0,7
Back current drain	AC disconnected: <0,1mA AC connected and charger remote off: < 6mA
No load power consumption	1 W
Efficiency	12/30:94% 12/50:92%	12/30:94% 12/50:92%	94%	94%
Charge voltage ‘absorption’	Normal: 14,4V High: 14,7V Li-ion: 14,2V	Normal: 28,8V High: 29,4V Li-ion: 28,4V
Charge voltage ‘float’	Normal: 13,8V High: 13,8V Li-ion: 13,5V	Normal: 27,6V High: 27,6V Li-ion: 27,0V
Storage mode	Normal: 13,2V High: 13,2V Li-ion: 13,5V	Normal: 26,4V High: 26,4V Li-ion: 27,0V
Fully programmable	Yes, with Bluetooth and/or VE.Direct
Charge current house battery	30 / 50 A	30 / 50 A	16 / 25 A	16 / 25 A
Low current mode	15 / 25 A	15 / 25 A	8 / 12,5 A	8 / 12,5 A
Charge current starter battery	3 A (1+1 output models only)
Charge algorithm	5 stage adaptive
Protection	Battery reverse polarity (fuse, not user accessible) / Output short circuit / Over temperature
Can be used as power supply	Yes, output voltage can be set with Bluetooth and/or VE.Direct
Operating temp. range	-20 to 60C (0 – 140F) Rated output current up to 40C, derate linearly to 20% at 60C
Humidity (non-condensing)	max 95%
Relay (programmable)	DC rating: 5 A up to 28 VDC