Specialized vinyl ester resin, for use in production processes such as: RTM, RTM Light and Vacuum Infusion.

Specialized vinyl ester resin, for use in production processes such as: RTM (Resin Transfer Molding), RTM Light and Vacuum Infusion.

Contains an accelerator. It does not contain wax and thus does not create a problems of detachment of the reinforcing sheets in constructions.

Suitable for use in marine applications e.g. boats, yachts etc.

The special chemical composition of the resin and the low viscosity increase the compatibility with all fiberglass. The long geltime (40-50 minutes) makes it possible to produce large objects reinforced with glass fibers, where long infusion times are required.

This particular vinyl ester also has a relatively low styrene content compared to similar resins, resulting in less impact on the environment.

This particular vinyl ester has low shrinkage. The final produced product, using this resin, has excellent mechanical strength characteristics, excellent chemical resistance and resistance to osmosis.

Vinyl esters are also more elastic than orthophthalic and isophthalic polyesters, therefore they have greater resistance topressure or tension.

For the final hardening of the vinyl ester, it is necessary to add a 2% catalyst by weight, i.e. 20g to 1kg of vinyl ester.

An 100gr catalyst is included in the 5kg package and a 400g in the 20kg package.

Download here the product’s Technical Brochure here.