Teak Wonder Brighteneris a lightening process used to eliminate shading from the teak which may still persist even after the application of theTeak Wonder Cleaner.

Teak cleaning is normally a problem that is often solved by drastic methods, such as sanding, or the use of powder, or extremely caustic detergents which will eventually severely damage the surface.

Teak Wonder Brightener is a lightening process used to eliminate shading from the teak which may still persist even after the application of the Teak Wonder Cleaner. The application ofTeak Wonder Brighteneris not always necessary, but when used on aged surfaces it has an effect that seems miraculous: the teak immediately regains its natural color (like newly sanded but without removing precious layers of grain).

The brightening process should be carried out on a wet surface, ideally straight after cleaning. ApplyTeak Wonder Brightenersparingly and evenly to avoid a patchy result then wash the deck.

The effect of theTeak Wonder Brightener, is immediate and the result instant. As with the cleaner, rinse away the solution with plenty of fresh water. The product is neither caustic nor aggressive, and will not damage rubber seals, paint or hardware.

Carefully wash away any product left on non teak surfaces.

The coverage is approximately 8-10 m2/ltr (depending on the condition of the wood).

Instructions

• Abundantly wet with fresh water the teak after it has been cleaned with Teak Wonder Cleaner.Thereafter applyTeak Wonder Brightenerdirectly on the surface evenly and generously.
• This product may be applied with a sponge, swab, or deck brush.
• The teak it will clear up instantaneously. Immediately rinse abundantly, dont let the product dry on the surface.

Teak Wonder Brightenerdoes not harm most marine paints, varnishes, fiberglass or aluminum alloys. Due to varied formulas of paints, varnishes, etc., we recommend avoiding contact with these surfaces to prevent possible damage.

Do not mixTeak Wonder Cleaner&Brightener.