Cressi Fiji is a snorkeling mask, that features the ultimate Cressi Fog Stop system.

Cressi Fiji is a snorkeling mask, that features the ultimate Cressi Fog Stop system.

A system of membranes, channels the air towards the lower part of the mask, away from the glasses. A second membrane seals the eye socket, so that warm air coming from exhalation, does not get on contact with the glass at all. This dramatically limits the fogging of the mask.

Another feature of the Cressi fog stop system, is the heat exchanging structure on the top of the masks silicone blades facilitate heat exchange between the mask and the water, balancing the temperature between the two in a shorter time. This also helps to reduce fogging.

Cressi Fiji is a mask thought for snorkeling. It features an elastic band, making it an easy to use mask, that will be appreciated by beginners, even by people with long hair. It can be used for scuba diving too, but keep in mind that an elastic strap is not as firm as a silicon one.

Technical Characteristics

• Inner Membranes – A patented membrane surrounding the inner nose pocket and both the inner eyes pockets, which acts as a barrier and traps any moisture escaping from the divers nose involuntarily, when breathing through the mouth. The result is that not only is the moisture channeled away from the lenses, thus avoiding the fogging up of them, but it also reduces the need to compensate for pressure. To further improve the anti-fog effect, Cressi suggests, the first times that the dive mask is used, to spray some anti-fog solution, or to apply some saliva on the inside of the lenses and then to rinse them with water.

• Heat Exchanger – The external part of the skirt features a cooling system, composed of two small heat exchangers that act as radiators. Thanks to this system, the temperature inside mask drops, coming closer to the external temperature and the droplets of humidity are trapped before the air reaches the lenses, preventing them from fogging up.

The lenses are not treated chemically and it should be remembered that when the mask is new, it is advised to clean them well with soap. Also perform the normal antifogging procedure before using the mask, with anti fog spray, or saliva on the dry glass.